Watch Strap Size Chart and Measuring Instructions
Step 1: Measure Lug Width
The easiest way: measure your current strap at the very end where it attaches to the watch (not near the buckle).

Step 2: Measure Wrist Size

Step 3: Determine Strap Length
Measure a strap that fits you well: the long piece and the short piece separately, without the buckle. If you have no strap to measure, use your wrist size and the chart below.
Step 4: Consult the Size Chart
| Size | Wrist size | Two-piece strap (long / short) | One-piece strap |
|---|---|---|---|
| S | 14 – 16.5 cm 5.5 – 6.5 inch |
110 / 70 mm | 230 mm |
| M | 16.5 – 18.5 cm 6.5 – 7.3 inch |
120 / 80 mm | 250 mm |
| L | 18.5 – 20.3 cm 7.3 – 8 inch |
135 / 80 mm | 270 mm |
Tapered sizes:
A tapered strap gradually narrows from the watch to the buckle. For example, a 20 mm strap may taper to 18 mm or 16 mm at the buckle.
Tapering gives a slimmer, more elegant look and makes the strap more comfortable on the wrist. A straight strap (no taper) looks bolder and suits sports and military watches.
On our product pages, tapered sizes are shown as lug width x buckle width — for example, 22x20 mm means 22 mm at the watch and 20 mm at the buckle.
Please Note:
The wrist size mentioned refers to the circumference of your wrist at the location where you typically wear your watch.
The length guide provided is approximate and applies to the straps depicted in the images. Variations in fit may arise due to variances in wrist shapes, buckle or clasp types, and differences in watch case sizes or shapes, which cannot be entirely accounted for.
Additionally, individual differences in hand size and structure may further influence fit.
Do not hesitate to contact us before placing your order in case of any questions.
Italian Buttero leather watch band, vintage leather watch strap. Color: black.
This watch band model is saddle stitched with french lin, has dyed edges to protect the strap from moisture and dirt getting inside, and nicely decorated with line on the upper side of the strap. Soft calfskin leather is used for lining.
Handmade in Finland.
Watchband width available:10 mm, 12 mm, 14 mm, 16mm, 17 mm, 18mm, 19 mm, 20mm, 21mm, 22mm, 23 mm, 24mm, 25 mm, 26mm.
Handmade watch strap made with beautiful vegetable tanned waxy Buttero leather from Tuscany, Italy. We cooperate with the finest tanneries in Italy and guarantee authentic leather quality. The strap lining is made of calfskin leather. Water-resistant calfskin leather for lining is also available, please, mention in comments if you prefer the water-resistant lining for the watch band. The leather is durable and will age getting a unique patina.
Other customized sizes are available on requests, including tapered versions: 26-22mm, 24-20 mm, 22-18 mm, 20-16 mm, 24-22mm, 22-20 mm, 20-18 mm.
All our products are manufactured entirely by hand only traditional methods which are over 100 years old. Without the use of mechanical means.
Quick-release spring bars and holes can be ordered in addition to the watch band as a separate service. In case you order 2 or more straps, quick release pins and holes are provided without extra charge, for free. Just mention in comments that you need quick release spring bars.
BUTTERO LEATHER
Buttero is vegetable tanned, processed at the Italian tannery using natural waxes and oils with metal-free leather processing techniques absolutely beautiful, soft and unique leather. The rich leather color adds a special character to the watch band.
Watch Band Length
XXS 100/60 mm
Extra Small (XS ) 105/65 mm
Small Length - 110/70mm - Wrist Size 5 3/4" to 6 3/4"
S/Medium-110mm/80mm
Medium Length - 120/80mm - Wrist Size 6 1/2" to 7 1/2"
M/Large-125mm/80mm
Large Length - 135/80mm - Wrist Size 7 1/4" to 8 1/4"
Custom length (mention in the comments).
The thickness of the leather strap is about 2,5-2,7 mm.
Includes stainless steel buckle.
Each leather has a distinct character, some with beautiful pull-ups, some smooth, some textured. Due to the natural variations in the leather, no two are exactly alike.
The color of a product can slightly differ from the photo because of the different monitor settings.
Other watch bands can be seen here
CUSTOM BUCKLE: in case you need other than listed buckle installed to the watch strap, please, check our buckles choice and chose the one you like to be installed to the watch strap. Black, gold, brass, matte, rose gold and other buckle designs are available at extra charge here: https://finwatchstraps.com/collections/buckles-and-accessories.
CUSTOM DYED EDGES: edges can be dyed on request at any watch strap. We use professional edge dyeing paint from Italy and Japan. Over 50 colors are available. Link https://finwatchstraps.myshopify.com/products/edge-processing
QUICK-RELEASES: quick-release pins can be installed to your custom made watch strap at extra charge Quick-releases are not available for Ammo straps, 3,5-4 mm bull leather, stingray and shark watch straps due to leather qualities. Link for quick-release pins order: https://finwatchstraps.com/products/quick-release-with-spring-bars-for-easy-band-replacement
Do not hesitate to contact us in case of any questions finwatchstraps at gmail.com
Each strap is handcrafted and custom made to order. Please, measure carefully watch lugs and your wrist before placing your order. Contact us prior to order placing if needed. Once product is cut, we do not accept changes anymore. We do not accept returns and exchanges for custom made products. Thank you for understanding. Please, note, each product is unique and might slightly differ from the listed image (leather color, leather structure, etc). For product customization, check drop-down options below or contact us via emailAlcantara suede-like lining:
customize your watch strap with suede-like Alcantara lining, available in multiple colors. More information:
https://finwatchstraps.com/products/alcantara-suede-like-microfiber-lining-for-your-watch-strap
Notched watch strap (corner, centre and multi notched strap options) customisation service: https://finwatchstraps.com/products/notch-cut-centre-nothched-multi-notched-watch-strap-customisations
PLANNING TO USE OWN BUCKLE? REMEMBER TO CUSTOMIZE STRAP HOLES
Default watch strap buckle holes are 2 mm in diameter.
FinWatchStraps is not affiliated with, endorsed by, or authorized by Rolex, Omega, Tudor, Blancpain, Tag Heuer, Apple or Swatch Group, or any other watch brand. All watches, images and logos are trademarks or registered trademarks of their respective owners.
Our goal is to ensure swift delivery of your order. Therefore, all ready to ship orders are processed and shipped within three business days of order confirmation.
Custom made items require 1-4 weeks for production, depending on order complexity and customization requests.
For international orders, we utilize reliable services such as DHL Express, UPS and Fedex. Economy airmail is offered for a reduced price, kindly note this shipping method is not tracable and takes 3-4 weks to get delivered by Posti and your country national post.
Meanwhile, local orders within Finland are shipped via Posti.
Please be aware that the transit times provided on our website are estimates only, and actual delivery times may vary depending on factors such as your location, weather conditions, public holidays, customs processing, and other unforeseen circumstances beyond our control.
International orders may be subject to duties and import taxes determined by your local customs authority. Additionally, the logistics carrier may impose a brokerage fee.
Please note that FinWatchStraps does not assume responsibility for the payment of any duties, taxes, or brokerage fees incurred, nor for customs inspections or transit delays. These charges are determined and collected by your country's government, and you may be required to settle them upon receipt of your shipment.